CONTACT INFORMATION
Room: 706, 7th Floor, General Mustafiz Tower, MIST.
Mirpur Cantonment, Dhaka-1216, Bangladesh.
ACADEMIC QUALIFICATION
- PhD, Civil Engineering, National University of Singapore, Singapore, 2012.
- BSc, Civil Engineering, Bangladesh University of Engineering and Technology, 2005
POSITION HELD
FACULTY MEMBER, Department of CE, Military Institute of Science and Technology (MIST), Mirpur Cantonment, Dhaka-1216, Bangladesh.
Duration: November 2015 – present.
AWARDS/ HONOURS
- MIST Best Research Medal 2018 - Faculty, Research, Military Institute of Science and Technology, 2018.
- Research Scholarship, Department of Civil Engineering, National University of Singapore, 2006 to 2009.
- Honor's Award, Department of Civil Engineering, Bangladesh University of Engineering and Technology, 2005.
- Dean' Award, Department of Civil Engineering, Bangladesh University of Engineering and Technology, 2001, 2003.
PROFESSIONAL AFFILIATIONS
- Life Fellow, Institution of Engineers Bangladesh (IEB)
- Enlisted Engineer, RAJUK
RESEARCH INTERESTS
Research Domain:
- Concrete
- Geopolymer
- Sustainable Construction Materials
- Analysis and Design of Protective Structures
- Computer aided Analysis of Structures
JOURNAL PUBLICATIONS
Islam M.J.,Rahman J., Nawshin S., Islam M.M., “Comparative Study on Physical and Mechanical Properties of Machine and Manually Crushed Brick Aggregate Concrete”, MIST International Journal of Science and Technology, Vol.8(1) (2020), 7-16.
Islam M.J., Alam M.R., Islam M.R. and Hasanuzzaman M., “Evaluation Of Commonly Used Aggregates For Sustainable Infrastructure Development In Bangladesh”, International Journal of GEOMATE, Vol.18 (66) (2020), 98-104. DOI: https://doi.org/10.21660/2020.66.9464
Islam M.J., Dipta I.A., Rahat, M., “Investigation of recycled poly-ethylene terephthalate (PET) as partial replacement of coarse aggregate in concrete”, Journal of Civil Engineering (IEB), Vol. 46 (I) (2018), 11-20.
Islam M.J., Meherier M. S., Islam A.K.M.R., “Effects of waste PET bottles aggregate on the compressive strength of concrete”, Construction and Building Materials, Vol. 125 (2016), 946-951.
Islam M.J., Islam A.K.M.R., and Meherier M.S., “An investigation on Fresh and Hardened Properties of Concrete while using Polyethylene Terephthalate (PET) as Aggregate“, International Journal of Civil, Structural, Construction and Architectural Engineering, Vol. 9, No. 5, (2015)
Islam M. J., Swaddiwudhipong S., and Liu Z. S., "Penetration of Concrete Targets Using a Modified Holmquist-Johnson-Cook Material Model", International Journal of Computational Methods, Vol. 9, No. 4 (2012).
Liu Z. S., Swaddiwudhipong S., and Islam M. J., "Perforation of Steel and Aluminum Targets Using a Modified Johnson-Cook Material Model", Nuclear Engineering and Design, Vol. 250 (2012) 108-115.
Islam M. J., Liu Z. S., and Swaddiwudhipong S., “Numerical study on concrete penetration/perforation under high velocity impact by ogive-nose steel projectile”, Computers and Concrete, Vol. 8, No. 1 (2011) 111-123.
Swaddiwudhipong S., Islam M. J., and Liu Z. S., "High velocity perforation simulations of lightweight target plates using a modified Johnson-Cook model", International Journal of Aerospace and Lightweight Structures, Vol. 1, No. 1 (2011) 67-88.
Swaddiwudhipong S., Islam M. J. and Liu Z. S., “High Velocity Penetration/Perforation Using Coupled Smooth Particle Hydrodynamics-Finite Element Method”, International Journal of Protective Structures, Vol. 1, No. 4 (2010) 489-506.
CONFERENCE PUBLICATIONS
Islam M.J., Alam M.R., Islam M.R. and Hasanuzzaman M., “Influence of Coarse Aggregate Properties on Concrete Performance”, In the 9th Int. Conf. on Geotechnique, Construction Materials and Environment, Tokyo, Japan, 20-22 November 2019, ISBN: 978-4-909106025 C3051
N. Haque, M. J. Islam, A. Tahsin and T. Mehdi. "Performance Evaluation of Concrete with Recycled Waste Polypropylene", In the 5th International Conference on Science, Engineering and Environment (SEE), Bangkok, Thailand, 11 - 13 November, 2019.
S. A. Morshed, M. J. Islam and A. F. Ashraf . “A Numerical Study of Vertical Discontinuity of RCC Frame Structures by Finite Element Analysis”, in the 4th Annual International Conference on Architecture and Civil Engineering, Singapore on 25 – 26 April 2016.
M. J. Islam, L. Zishun, and S. Swaddiwudhipong. 2008, “Coupled FE-SPH method for steel plate impact simulations”, In the 4th International Conference on Advances in Structural Engineering and Mechanics (ASEM’08), Jeju, Korea.
M. J. Islam, S. Swaddiwudhipong, and L. Zishun. 2008, “Numerical simulations of concrete penetration/perforation when subjected to high velocity impact”, In the 21st KKCNN Symposium on Civil Engineering, Singapore.
J. Rahman and M. J. Islam. 2018, "Permeability Measurement of a Pervious Concrete", In the 4th International Conference on Advances in Civil Engineering 2018 (ICACE 2018), 19 - 21 December 2018, Chittagong, Bangladesh.
Iftekhar Alam Dipta, Md. Rahat, Afsana Alam Akhie and Md. Jahidul Islam. “A Study on Green Lightweight Concrete using Recycled Poly-Ethylene Terephthalate (PET) as Coarse Aggregate” in Proceedings of the International Conference on Engineering Research, Innovation and Education 2017, 13- 15 January, SUST, Sylhet, Bangladesh.
M. J. Islam, S. A. Shafian and N. Sarwar. “Replacement of Traditional Coarse Aggregate”, in the Proceedings of 3rd International Conference on Advances in Civil Engineering, 21-23 December 2016, CUET, Chittagong, Bangladesh.
M. J. Islam, S. A. Shafian and N. Sarwar. “Fresh and Hard Properties of Concrete with Polypropylene”, in the 1st International Conference on Advances in Civil Infrastructure and Construction Materials (CICM), Dhaka, Bangladesh on 13-14 December, 2015.
S. M. Sayem, A. Hasnat, M. J. Islam and Tafsirojjaman. “A Study of Green Concrete using Waste Plastic and Stone Dust”, in the International Conference on Recent Innovation in Civil Engineering for Sustainable Development (IICSD), Gazipur, Bangladesh on 11-13 December, 2015.
M. J. Islam, N. Sarwar and S. A. Shafian. 2015, “An Investigation of Concrete Properties with Polypropylene (PP) as Partial Replacement of Coarse Aggregate”, in the International Conference on Recent Innovation in Civil Engineering for Sustainable Development (IICSD), Gazipur, Bangladesh on 11-13 December, 2015.
M. J. Islam, M. N. I. Masum and M. Akter. 2015, “Numerical Analysis of High Velocity Projectile Impact on Rigid Surface”, in the International Conference on Recent Innovation in Civil Engineering for Sustainable Development (IICSD), Gazipur, Bangladesh on 11-13 December, 2015.
Hasnat, A. S. M. Sayem, F. Tousif, M. J. Islam. 2014, “Recycling of Waste Plastic in Concrete as Coarse Aggregate”, In the 1st IUT International Seminar on Sustainability, Recycling and Durability of Concrete, Gazipur, Bangladesh.
M. J. Islam, N. B. Masud. 2014, "A Study of RCC Frame Buildings with Vertical Discontinuity", In the 2nd International Conference on Advances in Civil Engineering, Chittagong, Bangladesh.
M. J. Islam, A. Hasnat, A. S. M. Sayem, F. Tousif. 2014, "A Study of Lightweight Green Concrete Using Waste Plastic", In the 2nd International Conference on Advances in Civil Engineering, Chittagong, Bangladesh.
Workshop:
Short course on Constitutive Modeling of Soil and Tunnel Design, IUT, Gazipur, Bangladesh, 27 -29 November, 2019.
Training on MIDAS Civil, MIDAS, Navi, Mumbai, Inida, 27 July – 4 August 2018.
Short Course on Design of Steel and Concrete Structures for Lateral Loads using Proposed BNBC – 2015, MIST, Dhaka, 7 – 8 September 2016
Short Course on Advanced Bridge Design – 2016, MIST, Dhaka, 23- 24 September 2016.
Workshop on 'Fundamentals of Earthquake Resistant Building Design', BUET-Japan Institute of Disaster Prevention and Urban Safety, Bangladesh University of Engineering and Technology, Dhaka, February 2015.
JCI-IUT Workshop on Evaluation, Repair and Strengthening of Cracked Concrete Structures, Islamic University of Technology, Gazipur, Bangladesh, 2014.
Workshop on “Updating of Bangladesh National Building Code (BNBC)”, Housing and Building Research Institute, 2013.
Risk Assessment Application Training, Faculty of Engineering, National University of Singapore, Singapore, 2010.
Prestressed Concrete Design: ACI 2002 Building Code & AASHTO LRFD for Bridges, Faculty of Engineering, National University of Singapore, Singapore, 2006.
Training Course for Teaching Assistants, Centre for Development of Teaching and Learning, National University of Singapore, Singapore, 2006.
Introduction to the Laboratory Safety, Faculty of Engineering, National University of Singapore, Singapore, 2006.
Project Finance, Infrastructure Development Company Limited, Dhaka, Bangladesh, 2005.
SUBJECTS TAUGHT
|
Theory |
Sessional |
|
|
PROFESSIONAL EXPERIENCE
- Assistant Professor, Department of Civil and Environmental Engineering, North South University, Dhaka, 2015.
- Assistant Professor, Department of Civil and Environmental Engineering, Islamic University of Technology, Gazipur, 2013 - 2015.
- Assistant Professor, Department of Civil Engineering, Presidency University, Dhaka, 2011 to 2013.
- Senior Consultant, Keystone Business Support Company Ltd., Gulshan-2, Dhaka, Bangladesh, 09/2011 to 10/2015.
- Consultant, Bureau Veritas Bangladesh (Private) Limited, Banani, Dhaka, Bangladesh, 04/2014 to 10/2014.
- Investment Officer (Engineering), Infrastructure Development Company Limited (IDCOL), Dhaka, 2005.
